2015년 2월 4일 수요일

N-type SPLITTER (UHF 4:1 ports, 50 ohm)

● N-type SPLITTER  (UHF 4:1 ports, 50 ohm)

This product is for TVWS or Digital TV Broadcast/Communication
Splitter. This splitter can combine RF signals and also can divide signals.


 [Features]
 Frequency 470~698 MHz
 - VSWR            : Less than 1.3
 Impedance      : 50 ohm
 Insertion Power     : 20 W
 - Insertion Loss       : 0.5 dB
 Connector       N-type 50 ohm 



N-type SPLITTER (UHF 2:1 ports, 50 ohm)

● N-type SPLITTER  (UHF 2:1 ports, 50 ohm)

This product is for TVWS or Digital TV Broadcast/Communication
Splitter. This splitter can combine RF signals and also can divide signals.

[Features]
 Frequency 470~698 MHz
 - VSWR            : Less than 1.3
 Impedance      : 50 ohm
 Insertion Power     : 20 W
 - Insertion Loss       : 0.5 dB
 Connector       N-type 50 ohm 


SMA-type SPLITTER (UHF 2:1 ports, 50 ohm)

SMA-type SPLITTER (UHF 2:1 ports, 50 ohm)

This product is for TVWS or Digital TV Broadcast/Communication
Splitter. This splitter can combine RF signals and also can divide signals.



[Features]
 - Frequency : 470~698 MHz
 - VSWR            : Less than 1.3
 - Impedance      : 50 ohm
 - Insertion Power     : 2 W
 - Insertion Loss       : 0.5 dB
 - Connector       : SMA-type 50 ohm 


2015년 2월 3일 화요일

LTA-47S (UHF Dipole antenna)

LTA-47S (UHF Dipole antenna)

This antenna is for TVWS, Digital TV frequency or Broadcast / Communication-Receive and transmit antenna. This antenna is an Omni-directional antenna and has small output – vertical radiation.




[Features]
 - Frequency : 470~806 MHz
 - Gain : 3 dBi
 - VSWR : Less than 2.5 (50 ohm)
 - Insertion power : Less than 2 W
 - Radiation : Vertical
 - Connector : SMA-type 50 ohm
Cable length : 0.5 meter (RG-174)
 Size 48 x 193.3 mm


BC-2 Coupler for UHF and VHF band

 

 

(BC-2, UHF/VHF band)
 
 
 
This product is for Combine VHF signals or UHF signals into one F connector
And divide a signal which is received by UVHF into F connector UHF and VHF.
So the main feature is Combiner/Divider/Splitter.
 
- Easy Installation
- TV and FM at the same time (UHF and FM (VHF))
- If the signal is low, use the HDB-20UV.
 
 
[Features]
 - Frequency : Port 1(UHF 470~806 MHz), Port 2(88~230 MHz)
                        Port 3(88~806 MHz) 
 - Connector      : F-type 75 ohm
 - Function        : P1 Input/Output UHF, P2 Input/Output VHF
                        P3 Input/Output VHF~UHF
 - ETC               : This product is a Passive Coupler.
                         Bracket and Waterproof holder is with the
                         package. User’s guide
 * see the MP-6 user’s guide for Installation.
 - Package Contents  : Coupler, Bracket, Waterproof cap
 - Optional Items  : Coaxial Cable, Amplifier(HDB-20UV)
 
 
 
(1) DX-1 Antenna for Digital TV and FM radio reception
 
 
How to use..?
  DX-1 antenna is for VHF FM reception and UHF Digital TV reception.
Connect the UV coupler to the input of DX-1, and than connect the output to Digital TV or VHF to the FM tuner / Receiver. Than you can enjoy those at the same time!
  If the signal is not sufficient, use the amplifier. Digital TV for HDB-30H and FM tuner/receiver for HDB-20UV.
  To save the cable, install the coupler indoors. (same for the amplifier )
 
 
(2) When using FM antenna and Digital TV antenna
How to use…?
   If it is not able to receive Digital TV Broadcast and FM broadcast, it is better to install Outdoor antenna
    (MP-6, LP410P, LP-28, CR-48) and Omni- FM/VHF or DX-1 for FM reception to the rooftop and than combine it.
   In this case, combine and divide signals by BC-Coupler. It could be necessary to install the Coupler indoors to reduce the loss. 
    (HDB-20UV is needed for VHF and HDB-30H for UHF)
   • It would be better to install as following when the cable length is too long between the antenna and the TV/FM receiver.